The Sound Archive Project

Publications

Journal Papers

  1. Nascè, A.J., Hill, M., McBride, J.W., and Boltryk, P.J.
    A quantitative analysis of signal reproduction from cylinder recordings measured via non-contact, full surface mapping.
    J. Acoust. Soc. Am., 124, (4), 2042-2052, 2008, (doi: 10.1121/1.2973238)

  2. Boltryk, P.J., McBride, J.W., Hill, M., Nascè, A.J., Zhao, Z. and Maul, C.
    Non-contact surface metrology for preservation and sound recovery from mechanical sound recordings.
    J. Audio Eng. Soc, 56, (7/8) 545-559, 2008, (link)

  3. Boltryk, P.J., Hill, M., McBride, J.W., and Nascè, A.J.
    A comparison of precision optical displacement sensors for the 3D measurement of complex surface profiles.
    (In special issue: Eurosensors XX The 20th European conference on Solid-State Transducers - Eurosensors 2006, Eurosensors 20th Edition). Sensors and Actuators A: Physical, 142, (1), 2-11. (doi:10.1016/j.sna.2007.03.006)

  4. Fadeyev, V., Haber, C., Maul, C., McBride, J.W. and Golden, M.
    Reconstruction of recorded sound from an Edison cylinder using three-dimensional noncontact optical surface metrology.
    J. Audio Eng. Soc., 53, (6), 485-508, 2005 (link)

  5. Boltryk, P.J., Hill. M, and McBride, J.W.
    Comparing laser and polychromatic confocal optical displacement sensors for the 3-D measurement of cylindrical artefacts containing microscopic grooved structures
    Wear, 5pp. (In Press), 2008. (link)

Conference Papers

  1. McBride, J.W, Z. Zhao, Boltryk, P.J.
    A Comparison of Optical Sensing Methods for the High Precision 3D Surface Profile Measurement of Grooved Surfaces.
    23rd ASPE conference (American Society for Precision Engineering), Portland, October 2008.

  2. Nascè, A.J., McBride, J.W., Hill, M. and Boltryk, P.J.
    Signal Processing Methods for the Recovery of Audio from Early Acoustic Recordings, Measured Via Non-Contact Optical Sensor.
    In, 31st AES International Conference 2007: New Directions in High Resolution Audio, London, UK, 25-27 Jun 2007. (link)

  3. Boltryk, P.J., Hill, M. and McBride, J.W.
    Comparing laser and polychromatic confocal optical displacement sensors for the 3-D measurement of cylindrical artefacts containing microscopic grooved structures.
    In, 11th International Conference on Metrology & Properties of Engineering Surfaces, Huddersfield, UK, 17-20 Jul 2007. (link)

  4. McBride, J. W., Boltryk, P. J., Zhao, Z.,
    The relationship between surface incline and con-focal chromatic aberration sensor response.
    Proceedings of SPIE Vol. 6618, 66181F (2007). (link)

  5. Boltryk, P.J.,Hill M., McBride, J.W., and Nascè, A.J.
    A comparison of precision optical displacement sensors for the 3-D measurement of complex surface profiles
    In, 20th Eurosensors Conference Anniversary (Eurosensors XX), Göteborg, Sweden, 17 and Salimbeni, Renzo (eds.) O3A: Optics for Arts, Architecture, and Archaeology. USA, SPIE: International Society for Optical Engineering. (Proceedings of SPIE, 6618).

  6. Boltryk, P.J., Hill, M., McBride, J.W., Nascè, A., Bewley, N. and Prentice, W.
    Non-contact surface metrology for preservation and sound recovery from mechanical sound recordings
    In, JTS 2007: Audio Visual Heritage and the Digital Universe, Toronto, Canada, 28-30 Jun 2007.